Musaib Mohiuddin Einheit
ShopAccount
Concept visualization of the BAPH lead unit: black armour with gold trim and a sculpted metal face with crimson eyes

In development

BAPH

The robotics program of the Einheit Group: coordinated five-foot units operating under a seven-foot lead unit engineered for strength. Human safety is the governing principle of the program.

Concept visualization

Purpose

What BAPH is for

  1. The motive

    Heavy and hazardous work is still carried by people. BAPH is being developed to transfer that work to machines that are strong, precise and under unified command.

  2. One command

    Multiple units operate as a single formation. The lead unit issues the command, and every unit executes it together.

  3. Built for strength

    The lead unit stands seven feet on a broad, reinforced frame. The five-foot units are designed for speed and agility.

  4. Safe by design

    No weapon systems, by policy. Every unit carries a physical stop, and a unit that loses its command link halts in place.

Overview

Specifications

BAPH is in the design stage. No unit is offered for sale, and none operates in public. Dimensions are design targets and remain subject to change.

Safety is engineered in from the first drawing: a physical stop on every unit, and an automatic halt on loss of command link.

Stage
Design
Unit height
About 5 ft (design target)
Lead unit height
About 7 ft (design target)
Command
Units operate in formation on a single command from the lead unit
Mobility under study
Wheels, legs or wheel-legs
First lead-unit version (plan)
Wide wheeled base. Not capable of independent flight.
Airlift
By AEROHOP heavy-lift carrier (concept)
Advanced lead unit
Self-flying version, in development
Processor
SATYRN X1, designed in-house. Design study.
Governing principle
Human safety, without exception
Safety design (plan)
Physical stop on every unit; automatic halt on loss of link; testing on private property only

Engineering sheets

Sheets BP-001 to BP-005

Concept renders of the lead unit, marked up as engineering sheets: the general arrangement, the arm and leg assemblies, the formation and the assembly cell. Numbers on each sheet refer to the key beneath it.

Concept render of the BAPH lead unit standing full height in a dark hangar: matte black armour with gold trim, a sculpted metal face with crimson eyes and a crimson seam down the chest
  1. Sensor eyesForward vision and depth sensing in the eyes of the sculpted face.
  2. Lift hard pointsShoulder rings designed for AEROHOP airlift rigging.
  3. Command lightThe chest seam shows the state of the command link to people nearby.
  4. Elbow actuatorsLeft exposed for service; armour panels unbolt in the field.
  5. Knee actuatorsThe main load path of the seven-foot frame.
  6. Wide stanceBroad, reinforced feet for stability on industrial floors.
Sheet BP-001. Lead unit, general arrangement. Form not final. No weapon mount on any unit.
Concept render of the lead unit’s forearm and hand with the armour panel removed, showing actuators, drive electronics, cable harnesses and the gripper
  1. Linear actuatorsPaired drives in the forearm move the wrist and fingers.
  2. Drive electronicsMotor controllers with their own cooling fins.
  3. Status lightRed on fault; the arm holds its position and stops.
  4. Cable harnessBraided power and signal looms, routed clear of moving parts.
  5. Wrist jointGeared rotary joint for precise, repeatable placement.
  6. GripperFour fingers and an opposable thumb, built for tools and loads.
Sheet BP-002. Arm assembly, panel removed. Layout study.
Concept render of the lead unit’s legs, showing knee actuators, twin pistons, ankle dampers and wide reinforced feet
  1. Knee actuatorLarge rotary drive carrying the weight of the frame.
  2. Status lightShows the state of each leg at a glance.
  3. Twin pistonsPaired linear drives extend and brace the knee.
  4. Shin armourMachined plates with gold edge trim protect the drives.
  5. Ankle dampersShock absorbers take the load of each step.
  6. Foot and treadWide, reinforced feet with rubberised treads.
Sheet BP-003. Leg assembly. Wheels, legs and wheel-legs are all still under study.
Concept render of the formation: the seven-foot lead unit in front of four five-foot units in one row, all with sculpted metal faces and crimson eyes
  1. Lead unitSeven feet. Issues the command for the formation.
  2. Five-foot unitsBuilt for speed and agility; act as one on the lead unit’s command.
Sheet BP-004. Formation under one command.
Concept render of a lead unit with a sculpted metal face in an assembly gantry while two industrial arms fit its armour
  1. Unit in assemblyLead unit held upright in a steel gantry.
  2. Install armsIndustrial arms fit armour panels to the frame.
  3. Open frameDrives and harnesses stay reachable until the last panel.
Sheet BP-005. Assembly cell concept.

Proprietary processor

SATYRN X1

BAPH will run on a processor designed in-house: the SATYRN X1, the first chip of the group’s SATYRN program. A dedicated safety island on the chip exists solely to enforce the stop command.

Concept render of the SATYRN X1 processor package: a brushed black heat spreader marked SATYRN X1, four memory stacks and rows of capacitors on a dark substrate
  1. Compute dieBeneath the integrated heat spreader marked SATYRN X1.
  2. Memory stacksFour stacks of high-bandwidth memory beside the die.
  3. Power deliveryRows of decoupling capacitors steady the supply.
  4. SubstrateFlip-chip package on a multilayer organic substrate.
Sheet SX-001. SATYRN X1 package. Design study. No chip has been manufactured.Full SATYRN X1 page
  1. Why a proprietary chip

    A robot must compute where it stands, without dependence on a remote server. A processor built for that purpose can be faster and more efficient than a general-purpose one.

  2. One design, two programs

    The same design is planned for BAPH units and for the data halls of SATYRN.

  3. Current status

    SATYRN X1 is in architecture definition. No chip has been manufactured; the process node and power envelope are under evaluation.

In the air

BAPH × AEROHOP

BAPH and AEROHOP are being engineered to operate as one: a heavy-lift carrier rigs the lead unit by its shoulder hard points, carries it and sets it down where it is required.

An AEROHOP heavy-lift carrier hovers over a wet helipad at dusk while its sling is latched to the shoulder lift points of a BAPH lead unit
The carrier flies over an industrial port at dusk with the BAPH lead unit suspended beneath it
The carrier sets the BAPH lead unit down on a landing square at a night work site, raising dust
Airlift concept sequence: rig, lift and transit, set-down. Concept renders, animated. Not yet built or flown.
  1. On the ground

    BAPH units, including the first lead unit, are not capable of independent flight.

  2. With AEROHOP

    A heavy-lift AEROHOP carrier is being designed to lift a BAPH unit and deliver it where it is required.

  3. Advanced lead unit

    An advanced variant of the seven-foot lead unit, capable of flight under its own power, is in development. It is at an early design stage and has not flown.

Timeline

Status and roadmap

  1. Nov 2026Program initiated; research, physics and safety framework compiled.Done
  2. Nov 2026The name BAPH adopted; drawing BP-001 published.Done
  3. Nov 2026AEROHOP airlift concept published.Done
  4. \1
  5. Nov 2026Engineering sheets BP-001 to BP-005, the SATYRN X1 package sheet and the airlift sequence published as concept renders.Done
  6. Phase 0Design sheets, frame CAD and a simulation of rolling and standing.Next
  7. Phase 1First lead-unit prototype on a wheeled base, private property only.Next
  8. Phase 2First 5 ft unit, tethered tests.Next
  9. In developmentAirlift by AEROHOP carrier, and the advanced self-flying lead unit.Next

Legal

Notice

BAPH is an in-house robotics research and design program. No robot is offered for sale, lease or use, and none operates in public. It is a founding principle of the program that BAPH robots shall not be designed, equipped or used to cause harm to people. They will not be fitted with weapons or licensed for that purpose. Images are concept renders and drawings, not photographs of built hardware, and specifications (approximate heights of 5 ft and 7 ft) are design targets that may change. Any future product would be tested and offered only in compliance with applicable safety standards and law. Flight, whether by AEROHOP carrier or by an advanced lead unit, is a concept in early design. Nothing has been built or flown, and any flight would require Federal Aviation Administration authorisation.